Users Guide

In the WebUI
The RSTP port interface is designated as point-to-point, by default, under Configuration > Network > Ports
in the WebUI (
Figure 81).
Figure 81 Configuring RSTP
Since RSTP is enabled by default, the default values appear in the WebUI. Table 138 lists the RSTP defaults and
ranges (when applicable) in the configuration interface mode (config-if).
Feature Default Value/Range
Port Cost The RSTP interface path cost.
Range: 1–65536
Default: Based on Interface type:
Fast Ethernet 10Mbs:100
Fast Ethernet 100Mbs:19
1 Gigabit Ethernet:4
10 Gigabit Ethernet: 2
Priority Change the interface’s RSTP priority
Range: 0–255
Default: 128
Port Fast Change from blocking to forwarding
Default : Disabled
Table 138: RSTP Default Values
Dell Networking W-Series ArubaOS 6.5.x | User Guide RSTP | 636