Users Guide

parameter. Put the no option before any parameter to remove the current value for that parameter and return
it to its default setting. Enter exit to leave the 802.11a or 802.11g profile mode.
rf dot11a-radio-profile|dot11g-radio-profile <profile-name>
am-scan-profile
arm-profile
beacon-period
beacon-regulate
cap-reg-eirp
channel <num|num+|num->
channel-reuse
channel-reuse-threshold
clone
csa
csa-count
disable-arm-wids-function
dot11b-protection (for 802.11g radio profiles only)
dot11h
high-throughput-enable
ht-radio-profile
interference-immunity
maximum-distance
mgmt-frame-throttle-interval
mgmt-frame-throttle-limit
mode {ap-mode|am-mode|spectrum-mode}
no
radio-enable
slb-mode
slb-threshold
slb-update-interval
spectrum-load-bal-domain
spectrum-load-balancing
spectrum-monitoring
spectrum-profile
spur immunity <spur-immunity>
tpc-power
tx-power
You can also create a new 802.11a or 802.11g RF management profile by copying the settings of an existing
profile using the clone parameter. Using the clone command to create a new profile makes it easier to keep
constant attributes in common within multiple profiles.
rf dot11a-radio-profile <profile-name> clone <source-profile-name>
rf dot11g-radio-profile <profile-name>clone <source-profile-name>
Viewing RF Management Settings
To view a complete list of 802.11a or 802.11g RF management profiles and their status:
show rf dot11a-radio-profile|dot11g-radio-profile
To view the settings of a specific RF management profile:
show rf dot11a-radio-profile|dot11g-radio-profile <profile-name>
Assigning a 802.11a/802.11g Profile
To assign an 802.11a or 802.11g RF management profile to an AP group:
ap-group <group> dot11a-radio-profile <profile-name>
-or-
ap-group <group> dot11g-radio-profile <profile-name>
To assign an 802.11a or 802.11g RF management profile to an individual AP:
Dell Networking W-Series ArubaOS 6.5.x | User Guide Access Points |
554