Users Guide

Creating and Installing an Internal Captive Portal
If you do not wish to customize the default captive portal page, you can use the following procedures to create
and install a new internal captive portal page. This section describes the following topics:
l Creating a New Internal Web Page on page 326
l Installing a New Captive Portal Page on page 328
l Displaying Authentication Error Messages on page 328
l Reverting to the Default Captive Portal on page 329
l Configuring Localization on page 329
l Customizing the Welcome Page on page 332
l Customizing the Pop-Up box on page 334
l Customizing the Logged Out Box on page 334
Creating a New Internal Web Page
In addition to customizing the default captive portal page, you can also create your own internal web page. A
custom web page must include an authentication form to authenticate a user. The authentication form can
include any of the following variables listed in
Table 72:
Variable Description
user (Required)
password (Required)
FQDN The fully-qualified domain name (this is dependent on the setting of the
controller and is supported only in Global Catalog Servers software.
Table 72: Web Page Authentication Variables
Dell Networking W-Series ArubaOS 6.5.x | User Guide Captive Portal Authentication | 326