Manualshelf

Users Guide

ManualsBrandsDell ManualsAccess PlatformsW-Series Controller AOS
241242243244245246247248249250
Table Of Contents
248| BranchController Config for Controllers Dell Networking W-Series ArubaOS 6.5.x| User Guide
Parameter Description
l Category: The contract applies to all applications within a category type.
l Exclude: If a bandwidth contract is applied to an entire interface or category
of applications, you can create a bandwidth contract that excludes a single
application or application category from that contract.
Bandwidth Contract
If you chose the None, Application or Category option in the Service Type field,
select the name of the bandwidth contract to be applied to the interface.
Application
If you chose the Application option in the Service Type field, select the applic-
ation to which the bandwidth policy will be applied.
Category
If you chose the Category option in the Service Type field, select the application
category to which the bandwidth contract is applied.
Bandwidth Direction
Apply the bandwidth contract to upstream or downstream traffic.
PAN Portal
Portal IP The IP address or fully qualified domain name (FQDN) of the portal.
Trusted Certificate Specify the name of the self-signed or external certification authority (CA) cer-
tificate to establish an SSL connection to the portal.
User Name Username to authenticate to the Palo Alto Networks portal.
Password Password to authenticate to the Palo Alto Networks portal.
Table 63: Branch Config Group WAN Setting
Branch ConfigGroup Summary
The Summary tab on the Configuration>Branch>Smart Config page displays a summary of the branch
config group configuration created using the Smart Config WebUI, and a summary of the settings on a specific
branch controller.
To view a summary of the branch config group settings:
1. Navigate to Configuration>Branch>Smart Config>Summary.
2. Select the Profile Summary subtab.
3. Click the Profile drop-down list and select the branch config group whose configuration settings you want
to review.
To view a summary of the settings specific to an individual branch controller:
1. Navigate to Configuration>Branch>Smart Config>Summary.
2. Select the BOC Summary subtab.
3. Click the Profile drop-down list and select the MAC address of the branch controller whose configuration
settings you want to review.
Whitelist Configuration
The branch controller whitelist database links the MAC address of the branch controller to the branch config
group. Once you have assigned a branch config group to a branch controller, you cannot edit the config group