Manualshelf

Users Guide

ManualsBrandsDell ManualsAccess PlatformsW-Series Controller AOS
161162163164165166167168169170
Table Of Contents
161| OSPFv2 Dell Networking W-Series ArubaOS 6.5.x| User Guide
In the WebUI
1. Navigate to the Configuration > Advanced Services > All Profiles > VPN Authentication > default
page.
2. (Optional) Regardless of how an authentication server is contacted, the Export VPN IP address as a
route option causes any VPN client address to be exported to OSPF using IPC. Note that the Framed-IP-
Address attribute is assigned the IP address as long as any server returns the attribute. The Framed-IP-
Address value always has a higher priority than the local address pool.
3. Click Apply.
In the CLI
(host) (config) #aaa authentication vpn default
(host) (VPN Authentication Profile "default") #
(host) (VPN Authentication Profile "default") # export-route
Use the show ip ospf database command to show LSA types that are generated.
Sample Topology and Configuration
The figure below displays a sample OSPF topology followed by sample configurations of the Remote Branch 1,
Remote Branch 2, and the Central Office Controller (Active and Backup).
Figure 33 Sample OSPF Topology
Remote Branch 1
controller-ip vlan 30
vlan 16
vlan 30