Users Guide

l Individual mDNS static records
Group mDNS Static Records
You can create a group of mDNS records for a device. This section describes how to create static records of a
server as a group using the CLI.
Creating a PTR Record
Use the following command to create a PTR record:
(config) # airgroup static mdns-record ptr <mac_addr> <mdns_id> <domain_name> [server_ipaddr]
(config-airgroup-record) #
After creating a PTR record, controller displays the (config-airgroup-record) # prompt and you can create SRV, A,
AAAA, and TXT records under this prompt.
After creating a PTR, SRV, TXT, A, and AAAA static record, you can use the show airgroup cache entries command
to view and verify the records created. You can view only the static records in the output of the show airgroup cache
entries static command.
Creating an SRV Record
Use the following command to create an SRV record:
(config-airgroup-record) # srv <port> <priority> <weight> <host_name>
Creating an A Record
Use the following command to create an A record:
(config-airgroup-record) #a <ipv4addr>
You can create/delete an A record if a corresponding SRV record is available.
Creating an AAAA Record
Use the following command to create an AAAA record:
(config-airgroup-record) #aaaa <ipv6addr>
You can create/delete an AAAA record if a corresponding SRV record is available.
Creating a TEXT Record
Use the following command to create a TEXT record:
(config-airgroup-record) #txt <text>
Individual Static mDNS Records
You can create individual static records independently for each record type.
Creating an Individual SRV Record
Use the following command to configure an individual SRV record:
airgroup static mdns-record srv <mac_addr> <domain_name> <port> <priority> <weight> <host_
name> [server_ipaddr]
Dell Networking W-Series ArubaOS 6.5.x | User Guide AirGroup |
1025