Users Guide

Sample Configuration
(host) (config) #airgroup service allowall enable
Enabling or Disabling an AirGroup Service
In the WebUI
To enable or disable an AirGroup service using the controller WebUI:
1. Navigate to Configuration > Advanced Services > AirGroup.
2. On the AirGroup service details tab, select the AirGroup service and click Enable or Disable.
3. Click Apply.
In the CLI
Use the following command to enable or disable an AirGroup service:
airgroup service <string> {enable | disable}
Sample Configuration
(host) (config)#airgroup service airplay disable
Viewing AirGroup Service Status
In the WebUI
Use the following steps to view the status of AirGroup services using the controller WebUI:
1. Navigate to Configuration > Advanced Services > AirGroup.
2. Under the AirGroup service details tab, view the status of all the AirGroup services.
In the CLI
Use the following command to verify the status of an AirGroup Service:
show airgroup status
Sample Configuration
For sample configuration, see show airgroup status.
Viewing Blocked Services
The airgroup service <servicename> disable command blocks an AirGroup service by blocking the service
IDs for that service. When you enable an AirGroup service, service IDs of that service are enabled
automatically. To view the list of blocked services, use the show airgroup blocked-service-id command.
In the CLI
show airgroup blocked-service-id [mdns|dlna]
Viewing AirGroup Service Details
In the WebUI
To view the AirGroup service details using the controller WebUI:
1. Navigate to Configuration > Advanced Services > AirGroup service details.
2. Under AirGroup service details tab, click on any of the service name to view the service details.
In the CLI
Use the following command to view the service details of all AirGroup services:
show airgroupservice
Dell Networking W-Series ArubaOS 6.5.x | User Guide AirGroup | 1011