Users Guide

1008| AirGroup Dell Networking W-Series ArubaOS 6.5.x| User Guide
In the CLI
Use the following command to view the global settings of the AirGroup configuration and AirGroup services
configured in your WLAN controller.
(host) #show airgroup status
For more information, see Dell Networking W-Series ArubaOS 6.4 Command-Line Interface Reference Guide.
Defining an AirGroup Service
The AirGroup solution defines the concept of configurable AirGroup services. One or more mDNS and DLNA
services can be configured on the controller. When you define an mDNS service as an AirGroup service, you can
implement policies to restrict its availability to a specific user role or VLAN.
The following services are preconfigured and available as part of the factory default configuration:
l AirPlay
l AirPrint
l iTunes
l RemoteMgmt
l Sharing
l Chat
l GoogleCast
l DIAL
l DLNA Media
l DLNA Print
In the WebUI
An administrator can configure and use up to 100 AirGroup services, and each AirGroup service can support up
to 100 service elements. To define an AirGroup service using the controller WebUI:
1. Navigate to Configuration > Advanced Services > AirGroup.
2. On the AirGroup service details tab, click Add New.
3. Enter the name of the AirGroup profile in the Name field.
4. Enter the description for the AirGroup profile in the Description field.
5. Select Enable to enable this service.
6. Enter the VLANs that need to be restricted in the Disallow VLANs field.
7. Enter the roles that need to be restricted in the Disallow Roles field.
8. Enter the Service ID of the AirGroup service in the Services IDs field.
9. Click OK and then click Apply.
Table 237 describes the configuration parameters of an AirGroup service: