Users Guide

Figure 118 Active Devices Graph
Click the down arrow in the upper right corner of this chart then click the Options menu to access the
configuration settings for the Active Devices graph. Once you have configured the desired parameters, click OK
at the bottom of the Options menu to save your settings and return to the spectrum dashboards.
Parameter Description
Band Radio band displayed in this graph (2.4 GHz or 5 GHz)
Channel num-
bering
This parameter is not configurable for graphs created by hybrid APs or spectrum mon-
itor radios that use the 2.4 GHz radio band. A hybrid AP on a 20 MHz channel sees 40
MHz Wi-Fi data as non-Wi-Fi data. For spectrum monitors using the 5 GHz radio band,
click the Channel Numbering drop-down list and select either 20 MHz or 40 MHz
channel numbering to identify a channel numbering scheme for the graph. Graphs for
AP radios that support 802.11ac include an additional 80MHz option for very-high-
throughput channels.
Table 154: Active Devices Graph Options
Dell Networking W-Series ArubaOS 6.4.x | User Guide Spectrum Analysis | 788