Users Guide

l WMM Traffic Management
l Anyspot
As a part of the virtual APprofile configuration procedure, you must identify which instance of each profile
type associates with the Virtual AP profile. By default, each Virtual AP profile is associated with the default
versions of the AAA, 802.11k, Hotspot 2.0 and SSID profiles. The Virtual AP profile can also associate with a
WMMtraffic management profile, but as no WMM profile is associated by default, one must be manually
configured.
To configure Virtual AP profile associations:
1. Navigate to Configuration > Advanced Services > All Profiles.
2. Expand the Wireless LAN menu.
3. Expand the Virtual AP menu.
4. Select the Virtual AP you want to configure. The list of associated profile types appears in the Profiles list.
5. If a plus [+] sign appears beside an associated profile category, there is more than one profile type in that
category. Select that profile category to display the associated profiles within that category.
6. To associate a different profile with the Virtual APprofile, click the name of the any currently associated
profile in the Profiles list.
7. Click the drop-down list at the top of the Profile Details pane and select a different profile to associate to
the Virtual AP.
8. Click Apply.
Configuring a Virtual AP in the CLI
The following example defines a virtual AP using the command-line interface. For additional information on the
suggested order of steps to configure a virtual AP using the command-line interface, see Virtual AP
Configuration Workflow on page 472.
(host)(config) #wlan virtual-ap "THR-VIRTUAL-AP-PROFILE-WPA2"
ssid-profile "THR-SSID-PROFILE-WPA2"
aaa-profile "THR-AAA-PROFILE-WPA2"
vlan 60
Associating a Virtual AP Profile to an AP or AP Group
Use the following procedures to associate a virtual APprofile to an AP or group of APs.
In the WebUI
1. Navigate to the Configuration > Wireless > AP Configuration page.
2. Do one of the following:
l To associate the Virtual APprofile to a single AP, click the AP specific tab, and select the AP.
l To associate the Virtual APprofile to an APgroup, click the AP Group tab, and select the AP Group.
3. In the Profiles list, expand the Wireless LAN menu.
4. Select Virtual AP. The Profile Details window dislays the Virtual AP profiles currently associated to the AP or
AP group.
5. Click the Add a Profile drop-down list and select a new Virtual AP profile to associate to the AP. You can
associate multiple APprofiiles to an AP, but each virtual AP profile must reference a SSID profile with a
different network name (SSID).
6. Click Apply
Although you can create mutliple Virtual AP profiles that reference a single SSID profile, only one of these profiles
can be applied to an AP or AP group.
Dell Networking W-Series ArubaOS 6.4.x | User Guide Virtual APs | 480