Users Guide

1046 | AirGroup Dell Networking W-Series ArubaOS 6.4.x| User Guide
l AirGroup CPPM enforce registration. For more information, see Configuring CPPM to Enforce Registration
on page 1062.
l AirGroup controller-CPPM Interface definition. For more information, see Configuring the AirGroup-CPPM
Interface on page 1057.
l AirGroup multi-controller domain definition. For more information, see Configuring an AirGroup Domain on
page 1052.
l AirGroup CPPM query interval definition. For more information, see Configuring the CPPM Query Interval
on page 1057.
Local — There are a few configuration limitations on the local controller. The local controller can only include
the existing AirGroup domains in the AirGroup active-domain list, applicable for this controller. The local
controller cannot define or edit an AirGroup domain.
These configuration commands are applicable to both master and local controllers. The master controller does
not push the following AirGroup configuration commands to all applicable local controllers.
l AirGroup enable/disable parameter. For more information, see Enabling or Disabling AirGroup Global
Setting on page 1046.
l AirGroup service enable/disable parameter. For more information, see Enabling or Disabling an AirGroup
Service on page 1051.
l AirGroup allowall service status. For more information, see Integrated Deployment Model on page 1045.
l AirGroup disallow VLAN (global) definition. For more information, see Restricting AirGroup Servers for a
VLAN on page 1050.
l AirGroup multi-controller active-domain definition. For more information, see Configuring an AirGroup
active-domain on page 1053.
Configuring an AirGroup Integrated Deployment Model
Use the following procedures to enable the AirGroup feature and configure AirGroup services.
Enabling or Disabling AirGroup Global Setting
Starting from ArubaOS 6.4, AirGroup is disabled by default. To configure AirGroup global parameters, use the
following procedure:
In the WebUI
To enable or disable the AirGroup global setting using the controller WebUI:
1. Navigate to Configuration > Advanced Services > AirGroup.
2. Select the AirGroup Settings tab.
3. Under Global Setting > AirGroup Status, select enable from the drop-down list to enable the AirGroup
feature.
4. Under Global Settings > AirGroup MDNS Status, select enabled from the drop-down list to enable the
MDNS.
5. Under Global Settings > AirGroup DLNA Status, select enabled from the drop-down list to enable the
DLNA.
6. Under Global Setting > AirGroup CPPM enforce registration, select enable from the drop-down list to
register an AirGroup server on a CPPM server.
For more information on AirGroup CPPM enforce registration, see Configuring CPPM to Enforce
Registration on page 1062.
7. Under Global Setting > AirGroup IPV6 Support, select enable from the drop-down list.