Concept Guide

96 | g-channel Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide
g-channel
g-channel <channel> <tx-power>
Description
This command configures 2.4 GHz radio channels for a specific W-IAP.
Syntax
Parameter Description Range
<channel>
Configures the specified 2.4 GHz channel. The valid channels for a band are
determined by the AP regulatory
domain.
<tx-power>
Configures the specified transmission power values.
0-127 dBm
127dBM is the maximum possible
power that you can set for a radio.
Although the W-IAP allows you to
set the transmission power to the
127dBM, power is allocated based
on the limits set by the radio
hardware and country code in
which the W-IAP operates. The
country code and the W-IAP
hardware may support significantly
lower transmission power values
than 127dBm and in such cases,
the transmission power limit set by
the country code and the W-IAP
hardware takes precedence.
Usage Guidelines
Use this command to configure radio channels for the 2.4 GHz band for a specific W-IAP.
Example
The following example configures the 2.4 GHz radio channel:
(Instant AP)# g-channel 11 18
Command History
Version Description
Dell Networking W-Series Instant 6.2.1.0-
3.3
This command is introduced.