Concept Guide

enet0-bridging

Description

This command allows you to use all ports on the APs as downlink ports.

Usage Guidelines

Use this command for W-IAP models that have only one Ethernet port enabled. When Eth0 bridging is

configured, ensure that the uplink for each W-IAP is mesh link, Wi-Fi, or 3G/4G.

Example

The following command enables Eth0 bridging:

(Instant AP)# enet0-bridging

Command History

Version Description

Dell Networking W-Series Instant 6.2.1.0-

3.3

This command is introduced.

Command Information

W-IAP Platform Command Mode

All platforms

Privileged EXEC mode

Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide enet0-bridging | 85