Concept Guide

configure terminal
configure terminal
Description
This command allows you to enter configuration commands.
Syntax
No parameters.
Usage Guidelines
Upon entering this command, the enable mode prompt changes to:
(Instant AP)(config)#
To return to EXEC mode, enter Ctrl-Z, end or exit.
Example
The following command allows you to enter configuration commands:
(Instant AP) # configure terminal
Command History
Version Description
Dell Networking W-Series Instant
6.2.1.0-3.3
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Privileged EXEC mode.
Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide configure terminal | 65