Concept Guide

636 | wlan wispr-profile Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide
The WISPr RADIUS attributes and configuration parameters are specific to the RADIUS server used by your ISP
for the WISPr authentication. Contact your ISP to determine the parameter values for WISPr profile
configuration. You can find a list of ISO and ITU country and area codes at the ISO and ITU websites (iso.org
and itu.int).
Example
The following commands configure a WISPr authentication profile:
(Instant AP)(config)# wlan wispr-profile
(Instant AP)(WISPr)# wispr-location-id-ac 408
(Instant AP)(WISPr)# wispr-location-id-cc 1
(Instant AP)(WISPr)# wispr-location-id-isocc US
(Instant AP)(WISPr)# wispr-location-id-network wispr
(Instant AP)(WISPr)# wispr-location-name-location airport
(Instant AP)(WISPr)# wispr-location-name-operator-name KNP
(Instant AP)(WISPr)# end
(Instant AP)# commit apply
Command History
Version Description
Dell Networking W-Series Instant 6.2.1.0-
3.3
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Configuration mode and WISPr profile sub-mode.