Concept Guide

602 | wlan auth-server Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide
Command/Parameter Description Range Default
When two or more authentication
servers are configured on the W-IAP
and a server is unavailable, the
dead time configuration determines
the duration for which the
authentication server would be
available if the server is marked as
unavailable.
drp-ip <IP-address> <mask> vlan
<vlan> gateway <gateway-IP-
address>
Configures the IP address, net mask
and VLAN,which will be used as
source address and VLAN for
RADIUSpackets.
NOTE: Before configuring DRP IP
address, ensure that dynamic
RADIUS proxy is enabled, and a
static Virtual Controller IP is
configured.
— —
ip <host>
Configures the IPaddress or the
host name of the RADIUS server.
— —
key <key>
Configures a shared key
communicating with the external
RADIUS server.
— —
nas-id <ID>
Configures Network Attached
Storage (NAS) identifier strings for
RADIUS attribute 32, which is sent
with RADIUS requests to the RADIUS
server.
— —
nas-ip <IP>
Configures the Virtual Controller IP
address as the NAS address which
is sent in data packets.
— —
port <port>
Configures the authorization port
number of the external RADIUS
server.
— 1812
radsec [port <port>]
The RadSec command enables
secure communication between the
RADIUS server and W-IAP clients by
creating a TLS tunnel between the
W-IAP and the server.
1-65534 2083