Concept Guide

upgrade-image
upgrade-image <url>
upgrade-image2 <url>
upgrade-image2-no-reboot
Description
These commands allow you to upgrade a W-IAP to use a new image file.
Syntax
Parameter Description
upgrade-image
Upgrades the W-IAP to use a new image.
upgrade-image2
Uploads an additional image file and upgrades the W-IAP to use
this image file when required. You can also use this command
to upgrade images for multi-class W-IAP cluster.
upgrade-image2-no-reboot
Uploads an image file and upgrades the W-IAP to use the new
image without rebooting the W-IAPs.
<url>
Allows you to specify the FTP, TFTP, or HTTP URL.
Usage Guidelines
Use these commands to upgrade W-IAP to use an image file uploaded from the FTP or TFTP server, or by using
an HTTP URL. Before uploading an image file, ensure that you have the appropriate image file for your W-IAP.
The following examples describe the image class for different W-IAP models:
l For W-IAP134/135—DellInstant_Cassiopeia_<build-version>
l For W-IAP108/109, W-IAP103, and W-IAP114/115—DellInstant_Pegasus_<build-version>
l For W-IAP155/155P—DellInstant_Aries_<build-version>
l For W-IAP204/205 and W-IAP205H—DellInstant_Taurus_6.4.3.1-4.2.0.0.0_xxxx
l For W-IAP224/225, W-IAP228, W-IAP274/275, and W-IAP277—DellInstant_Centaurus_<build-version>
l For all other W-IAPs—DellInstant_Orion_<build-version>
Example
The following examples upgrade a W-IAP by using an image file from the FTP server:
(Instant AP)# upgrade-image ftp://192.0.2.7/Dell_Orion_6.2.1.0-4.0.0.0_xxxx
(Instant AP)# upgrade-image2-no-reboot ftp://192.0.2.7/Dell_Orion_6.2.1.0-4.0.0.0_xxxx
To upgrade images for a multi-class W-IAP cluster:
(Instant AP)# upgrade-image2
Orion@tftp://192.168.0.1/mips32.ari;Cassiopeia@tftp://192.168.0.1/armv5te.ari
Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide upgrade-image | 555