Concept Guide

allow-new-aps
allow-new-aps
no…
Description
This command allows the new access points to join the W-IAP cluster.
Syntax
Command/Parameter Description
allow-new-aps
Allows new access points in the domain.
no
Removes the specified configuration parameter.
Usage Guidelines
Use this command to allow the new access points to join the W-IAP cluster. When this command is enabled,
only the licensed slave W-IAPs can join the cluster.
Example
The following command allows the new W-IAPs to join the cluster.
(Instant AP)(config)# allow-new-aps
Command History
Version Description
Dell Networking W-Series Instant 6.2.1.0-3.3 This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Configuration mode
Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide allow-new-aps | 31