Concept Guide

126 | hotspot h2qp-oper-name-profile Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide
hotspot h2qp-oper-name-profile
hotspot h2qp-oper-name-profile <profile>
enable
op-fr-name <name>
op-lang-code <language>
no…
Description
This command configures a Hotspot 2.0 Query Protocol (H2QP) operator-friendly name profile.
Syntax
Parameter Description
Range Default
hotspot h2qp-oper-name-
profile <profile>
Creates an operator-friendly name profile. — —
enable
Enables the operator-friendly name profile.
— —
op-fr-name
<name>
Configures an operator-friendly name to be sent by
devices using this profile. If the name includes
quotation marks (“), include a backslash character
(\) before each quotation mark. (e.g. \"example\")
1-64
alphanumeric
characters
—
op-lang-code <language>
Configures an ISO 639 language code that
identifies the language used in the op-fr-name
command.
— —
no…
Removes any existing configuration.
— —
Usage Guidelines
Use this command to configure an operator-friendly name that can identify the operator and also provides
information about the location.
Example
The following example configures an operator friendly profile:
(Instant AP)(config)# hotspot h2qp-oper-name-profile Profile1
(Instant AP)(operator-friendly-name "Profile1")# op-fr-name hotspot1
(Instant AP)(operator-friendly-name "Profile1")# op-lang-code EN
(Instant AP)(operator-friendly-name "Profile1")# enable
(Instant AP)(operator-friendly-name "Profile1")# end
(Instant AP)# commit apply
Command History
Version Description
Dell Networking W-Series Instant 6.2.1.0-
3.3
This command is introduced.