Concept Guide
102 | gre type Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide
gre type
gre type <type>
Description
This command configures a GREprotocol number as GRE type.
Syntax
Parameter Description Range Default
gre type <type>
Configures the protocol number or IP address for
GRE type
16-bit
protocol
number
0
Usage Guidelines
Use this command to specify GRE type. The 16-bit protocol number uniquely identifies a Layer-2 tunnel. The
W-IAPs or controllers at both endpoints of the tunnel must be configured with the same protocol number.
Example
The following example configures the GRE type:
(Instant AP)(config)# gre type 0
(Instant AP)(config)# end
(Instant AP)# commit apply
Command History
Version Description
Dell Networking W-Series Instant 6.2.1.0-
3.3
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Configuration mode