Concept Guide

Parameter Description
Assigned
Vlan
Displays the VLAN ID assigned to the branch.
Key
Displays the key for the branch, which is unique to each branch.
Bid(Subnet
Name)
Displays the Branch ID (BID) of the subnet.
l In the example above, the controller displays bid-per-subnet-per-branch i.e., for "LA"
branch, BID "2" for the ip-range "10.15.205.0-10.15.205.250" with client count per
branch "5"). If a branch has multiple subnets, it can have multiple BIDs.
l If a branch is in UP state and does not have a Bid(Subnet Name), it means that the W-
IAP is connected to a controller, which did not assign any BID for any subnet. In the
above example, "Paris-CB:D3:16" branch is UP and does not have a Bid (Subnet
Name). This means that either the W-IAP is connected to a backup controller or it is
connected to a primary controller without any distributed L2 or L3 subnets.
The show iap table command output does not display the Key and Bid(Subnet Name) details.
Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | User Guide IAP-VPN Deployment | 249