Concept Guide

Type of
Alert
Description Information Displayed
Client Alerts The alert type, Client Alerts,
occur when clients are
connected to the Instant
network.
The alert type, Client Alert displays the following
information:
l Timestamp—Displays the time at which the client alert
was recorded.
l MAC address—Displays the MAC address of the client
that caused the alert.
l Description—Provides a short description of the alert.
l Access Points—Displays the IP address of the W-IAP to
which the client is connected.
l Details—Provides complete details of the alert.
Active Faults The Active Faults alerts occur
in the event of a system fault.
The Active Faults alerts consists of the following
information:
l Time—Displays the system time when an event occurs.
l Number—Indicates the number of sequence.
l Description—Displays the event details.
Fault History
The Fault History alerts display
the historic system faults.
The Fault History alert displays the following information:
l Time—Displays the system time when an event occurs.
l Number—Indicates the number of sequence.
l Cleared by—Displays the module which cleared this fault.
l Description—Displays the event details.
Table 15: Types of Alerts
The following figures show the client alerts, active faults, and fault history:
Figure 18 Client Alerts
Dell Networking W-Series Instant 6.5.1.0-4.3.1.0 | User Guide Instant User Interface | 50