Concept Guide

302 | Services Dell Networking W-Series Instant 6.5.1.0-4.3.1.0 | User Guide
3. On the Access tab, select the role for which you want create the access rule.
4. Under Access Rules, click New.
5. In the New Rule window that is displayed, select CALEA.
6. Click OK.
7. Create a role assignment rule if required.
8. Click Finish.
In the CLI
To create a CALEA access rule:
(Instant AP)(config)# wlan access-rule <name>
(Instant AP)(Access Rule <name>)# calea
(Instant AP)(Access Rule <name>)# end
(Instant AP)# commit apply
To assign the CALEA rule to a user role:
(Instant AP)(config)# wlan ssid-profile <name>
(Instant AP)(SSID Profile <name>)# set-role <attribute>{{equals | not-equals | starts-with|
ends-with | contains}<operator><role> | value-of}
(Instant AP)(SSID Profile <name>)# end
(Instant AP)(SSID Profile <name>)# commit apply
To associate the access rule with a wired profile:
(Instant AP)(config)# wired-port-profile <name>
(Instant AP)(Wired ap profile <name>)# access-rule-name <name>
(Instant AP)(Wired ap profile <name>)# end
(Instant AP)# commit apply
Verifying the configuration
To verify the CALEA configuration:
(Instant AP)# show calea config
To view the tunnel encapsulation statistics:
(Instant AP)# show calea statistics
Example
To enable CALEA integration:
(Instant AP)(config)# calea
(Instant AP)(calea)# ip 192.0.2.7
(Instant AP)(calea)# ip mtu 1500
(Instant AP)(calea)# encapsulation-type GRE
(Instant AP)(calea)# gre-type 255
(Instant AP)(calea)# end
To enable a CALE access rule:
(Instant AP)(config)# wlan access-rule ProfileCalea
(Instant AP)(Access Rule "ProfileCalea")# calea
(Instant AP)(Access Rule "ProfileCalea")# end
(Instant AP)# commit apply
To assign the CALEA rule to user role:
(Instant AP)(config)# wlan ssid-profile Calea-Test
(Instant AP)(SSID Profile"Calea-Test")# enable
(Instant AP)(SSID Profile"Calea-Test")# index 0
(Instant AP)(SSID Profile"Calea-Test")# type employee
(Instant AP)(SSID Profile"Calea-Test")# essid QA-Calea-Test
(Instant AP)(SSID Profile"Calea-Test")# opmode wpa2-aes
(Instant AP)(SSID Profile"Calea-Test")# max-authentication-failures 0