Concept Guide

462 | show log l3-mobility Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide
show log l3-mobility
show log l3-mobility [<count>]
Description
This command displays the logs for Layer-3 mobility domains configured on a W-IAP.
Syntax
Parameter Description
<count>
Filters the log output based on the number specified.
Usage Guidelines
Use this command to view the L3-mobility logs for a W-IAP.
Example
The following output is displayed for the show log l3-mobility command:
May 9 21:23:07: Potential Foreign Client Information: mac c4:85:08:de:06:d4 rcvd from self
vlan 0, 1 tid 255 oldapip 0.0.0.0 fapip 10.17.88.59 hapip 0.0.0.0 vcip 0.0.0.0 info l2-timed-
out,test
May 9 01:43:22: Station Offline: mac 08:ed:b9:e1:51:87 rcvd from self vlan 0, 0 tid 255
oldapip 0.0.0.0 fapip 0.0.0.0 hapip 0.0.0.0 vcip 0.0.0.0 info
May 9 01:25:53: This Client is Normal: mac 08:ed:b9:e1:51:87 sent to self vlan 0, 1 tid 255
oldapip 0.0.0.0 fapip 10.17.88.59 hapip 0.0.0.0 vcip 0.0.0.0 info
May 9 01:25:53: Too many retries: mac 08:ed:b9:e1:51:87 rcvd from self vlan 0, 1 tid 255
oldapip 0.0.0.0 fapip 10.17.88.59 hapip 0.0.0.0 vcip 0.0.0.0 info
May 9 01:25:52: Potential Foreign Client Information: mac 08:ed:b9:e1:51:87 rcvd from self
vlan 0, 1 tid 255 oldapip 0.0.0.0 fapip 10.17.88.59 hapip 0.0.0.0 vcip 0.0.0.0 info l2-timed-
out,test
The output of this command provides the following information:
Content Description
Timestamp
Indicates the timestamp of the L3 mobility event.
Client MAC
Indicates the MAC address of the roaming clients.
Event
Provides a description of the mobility event.
Home Vlan
Displays the VLAN ID associated with the home subnet.
VAP Vlan
Displays the VLAN ID associated with the Virtual AP.
tid
Indicates the tunnel interface used for routing packets.
Old AP IP
Indicates the IP address of the W-IAP from which the client has roamed.
FAP IP
Indicates the IP address of the W-IAP in the foreign subnet.
HAP IP
Indicates the IP address of the W-IAP in the home subnet, to which the client is