Concept Guide

424 | show ids Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide
The show ids aps command output provides information on the MAC address of interfering W-IAPs, the
network to which the unknown W-IAPs are connected, the interference classification, channels on which the
unknown APs are detected, the radio configuration type and recent timestamp of the interference.
The following output is displayed for the show ids clients command:
Unknown Clients Detected
------------------------
MAC Address Network Classification Chan. Type Last Seen
----------- ------- -------------- ----- ---- ---------
00:26:c6:4d:2b:74 ethersphere-wpa2 Interfering 1 GN 20MZ 17:26:48
00:24:d7:40:a8:64 akvoice1 Interfering 6 G 17:38:49
00:24:d7:40:ca:88 akvoice1 Interfering 6 G 17:39:50
74:e5:43:4b:3b:ff manju34-vap1 Interfering 44 AN 40MZ 17:39:50
The show ids clients command output provides information on the MAC address of interfering clients, the
network to which the unknown clients are connected, the interference classification, channels on which the
unknown clients are detected, the radio configuration type and recent timestamp of the interference.
The following output is displayed for the show ids phy-types command:
Physical Types
--------------
Keyword Value
------- -----
b 0
a 1
g 2
ag 3
The following output is displayed for the show ids rap-types command:
RAP Types
---------
Keyword Value
------- -----
valid 0
interfering 1
rogue 2
dos-attack 3
unknown 4
known-interfering 5
suspect-rogue 6
Command History
Version Description
Dell Networking W-Series Instant 6.4.2.3-4.1.2.0 This command is modified.
Dell Networking W-Series Instant 6.2.1.0-3.3 This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Privileged EXEC mode