Concept Guide

332 | show ap monitor Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide
show ap monitor
show ap monitor {active-laser-beams|ap-list|ap-wired-mac <mac>|arp-cache| containment-info|
enet-wired-mac <mac>| ids-state <type>| pot-ap-list | pot-sta-list| rogue-ap <mac>| routers|
scan-info| sta-list| state <mac>| stats <mac>| status}
Description
This command shows information for W-IAP Air Monitors.
Syntax
Parameter Description
active-laser-beams
Shows active laser beam generators. The output of this command shows a list
of all APs that are actively performing policy enforcement containment such as
rogue containment. This command can tell us which AP is sending out
deauthorization frames, although it does not specify which AP is being
contained.
ap-list
Shows list of APs being monitored.
ap-wired-mac
Shows the MAC address of the wired W-IAP.
arp-cache
Shows ARP Cache of learned IP to MAC binding
containment-info
Shows containment events and counters triggered by the wired containment
and wireless containment features configured in the
ids. The output of this
command shows device and target data for wired containment activity, as well
as data for the following counters. Wireless Containment Counters:
l Last Deauth Timer Tick
l Deauth frames to AP
l Deauth frames to Client
l Last Tarpit Timer Tick
l Tarpit Frames: Probe Response
l Tarpit Frames: Association Response
l Tarpit Frames: Authentication
l Tarpit Frames: Data from AP
l Tarpit Frames: Data from Client
l Last Enhanced Adhoc Containment Timer Tick
l Enhanced Adhoc Containment: Frames To Data Sender
l Enhanced Adhoc Containment: Frames To Data Receiver
l Enhanced Adhoc Containment: Response to Request
Enhanced Adhoc Containment: Replay Response Wired Containment Counters:
l Last Wired Containment Timer Tick
l Last Tagged Wired Containment Timer Tick
l Spoof frames sent
l Spoof frames sent on tagged VLAN