Concept Guide

298 | show ap debug client-frame-history Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide
show ap debug client-frame-history
show ap debug client-frame-history client-mac <mac-address> radio {0|1}
Description
This command displays the latest Received Signal Strength Indicator (RSSI) information about the incoming
packets for a client connected to a W-IAP.
Syntax
Parameter Description
client-mac <mac-address>
Allows you to filter the output based on a client MAC address.
radio {0|1}
Allows you to specify the AP radio ID to which the client is associated.
Usage Guidelines
Use this command to verify if the RSSI information is frequently updated. If the RSSI information is not
frequently updated, a client may be steered to an improper new AP in the cluster.
Example
The following example shows the output of show ap debug client-frame-history command:
Frame History count: 5
Client Frame History Report
---------------------------
Received Time RSSI Previous RSSI
------------- ---- -------------
1s 42 42
1s 42 42
1s 42 42
1s 42 42
1s 42 42
Command History
Version Description
Dell Networking W-Series Instant 6.4.2.0-
4.1.1
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Privileged EXEC mode