Concept Guide

272 | show ap client-match-refused Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide
show ap client-match-refused
show ap client-match-refused [<radio>]
Description
This command displays the list of clients for which the channel allocation is refused based on the client match
configuration parameters.
Syntax
Parameter Description
<radio>
Allows you to filter the output based the ID number of the radio (for example, 0
or 1).
Usage Guidelines
Use this command to view the list of clients for which client match actions are refused. When the client match
feature is enabled on a W-IAP, the W-IAP measures the RF health of its associated clients. If spectrum load
balancing is triggered and a client's Received Signal Strength Indication (RSSI) is or less than 20 dB, clients are
moved from one AP to another for better performance and client experience.
Example
The following example shows the output of the show ap client-match-refused command.
Client Match Status:: RUNNING BALANCING
Associated:1, Threshold:1
Leaving:0, Coming:0
Last Refused Clients Table
--------------------------
MAC RSSI Refused Count Last Refused Time
--- ---- ------------- -----------------
02:99:00:00:01:33 27 2 3
7e:17:7b:2c:f5:e2 5 4 6
00:27:10:c5:96:54 22 1 0
18:3d:a2:0a:48:3c 33 2 1
02:21:00:00:00:14 28 2 5
00:27:10:cf:ef:b4 32 2 7
7e:17:7b:27:6b:af 6 2 3
00:db:df:0a:6a:db 21 2 4
00:24:6c:c8:74:4c# show ap client-match-ref 1
Client Match Status:: RUNNING
Associated:0, Threshold:1
Leaving:0, Coming:0
Last Refused Clients Table
--------------------------
MAC RSSI Refused Count Last Refused Time
--- ---- ------------- -----------------
02:99:00:00:01:33 35 2 3
00:db:df:0a:6a:db 29 3 10
fc:75:16:03:40:d9 41 10 3
18:3d:a2:09:79:ac 27 2 11
00:db:df:05:1f:d6 37 2 6
02:21:00:00:00:14 23 3 3
00:27:10:cf:ef:b4 27 2 5
00:27:10:cf:f2:4c 18 1 6