Concept Guide

256 | show ap arm Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide
Column Description
New channel
Displays the channel number used by the W-IAP after the ARM change.
Old Power
Indicates power values configured on the W-IAP before the ARM change.
New Power
Indicates power values configured on the W-IAP after the ARM change.
Reason
Indicates the reason for changes in channels. For more information about the
reason, see the description below the command output.
show ap arm neighbors
The show ap arm neighbors command displays the ARM settings on the W-IAP neighbors. The following
example shows the output of the show ap arm neighbors command:
ARM Neighbors
-------------
bssid essid channel rssi tx-power PL (dB) AP Flags Last Update
----- ----- ------- ---- -------- ------- -------- ------------
6c:f3:7f:45:57:20 7SPOT 1 8 0 0 Passive
6c:f3:7f:56:7e:a0 7SPOT 1 9 0 0 Passive
6c:f3:7f:56:7e:a1 NTT-SPOT 1 12 0 0 Passive
00:24:6c:80:77:c1 NTT-SPOT 1 9 0 0 Passive
6c:f3:7f:45:57:21 NTT-SPOT 1 8 0 0 Passive
6c:f3:7f:44:91:11 NTT-SPOT 1 9 0 0 Passive
00:24:6c:2b:fd:e8 qa-mv-vap3 161 5 9 98 Passive
00:24:6c:80:4d:62 docomo 1 10 0 0 Passive
(Total updates)
---------------
Neighbor Summary:One hop 232 Two hop 0 Current Time: 2013-05-11 04:31:33
The output of this command includes the following information:
Column Description
bssid
Indicates the BSSID of the W-IAP neighbors.
essid
Indicates the ESSID of the W-IAP neighbors.
Channel
Indicates the channels assigned to the W-IAP neighbors
rssi
Indicates the Received signal strength indication (RSSI) values associated with
the ARM channels to which W-IAP neighbors are connected.
tx power
Indicates the transmission power.
PL
Indicates power loss.
AP Flags
Indicates the status of W-IAP neighbors.
Last Update
Displays details of last updates if any.
Total updates
Displays a summary if updates.