Concept Guide

246 | show ap-env Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide
show ap-env
show ap-env
Description
This command displays all provisioned AP parameters such as the type of antenna used by a. The output of
this command also indicates if the W-IAP is provisioned as a master W-IAP.
Usage Guidelines
Use this command to view the antenna configuration details for a W-IAP.
Example
The following output is displayed for the show ap-env command:
Antenna Type:Internal
ipaddr:10.17.161.254
netmask:255.255.255.0
gatewayip:10.17.161.1
dnsip:10.13.6.110
wifi0_mode:spectrum
wifi1_mode:spectrum
uplink_vlan:1
The output of this command indicates if the W-IAP is configured to use an external or integrated antenna and if
the W-IAP is configured as a master W-IAP.
Command History
Version Description
Dell Networking W-Series Instant 6.4.3.1-4.2 The output of this command was modified to include fields
such as IP address, netmask, gateway IP address, DNS IP
address, AP radio modes, and uplink VLAN configuration.
Dell Networking W-Series Instant 6.3.1.1-4.0
This command is modified.
Dell Networking W-Series Instant 6.2.1.0-3.3
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Privileged EXEC mode