Concept Guide

178 | managed-mode-profile Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide
Usage Guidelines
Use this command to enable automatic configuration of the W-IAPs in the management mode.
The following checks must be performed before the configuration:
l Ensure that the W-IAPs running Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 or later release version.
l When the W-IAPs are in the management mode, ensure that the W-IAPs are not managed by W-AirWave.
Example
The following example configures a W-IAP for automatic configuration:
(Instant AP)(config)# managed-mode-profile
(Instant AP)(managed-mode-profile)# username <username>
(Instant AP)(managed-mode-profile)# password <password>
(Instant AP)(managed-mode-profile)# config-filename instant.cfg
(Instant AP)(managed-mode-profile)# download-method ftps
(Instant AP)(managed-mode-profile)# sync-time day 00 hour 03 min 30 window 02
(Instant AP)(managed-mode-profile)# retry-poll-period 10
(Instant AP)(managed-mode-profile)# end
(Instant AP)# commit apply
Command History
Version Description
Dell Networking W-Series Instant 6.4.3.1-
4.2.0.0
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Configuration mode