Concept Guide

128 | hotspot h2qp-oper-class-profile Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | CLI Reference Guide
hotspot h2qp-oper-class-profile
hotspot h2qp-oper-class-profile <profile>
enable
op-class <class>
no…
Description
This command configures a Hotspot 2.0 Query Protocol (H2QP) profile that defines the Operating Class to be
sent in the H2QP IE.
Syntax
Parameter Description
Range Default
hotspot h2qp-oper-
class-profile
<profile>
Creates operating class profile. — —
enable
Enables the operating class profile.
— —
op-class <class>
Configures the operating class for the
devices’ BSS.
1-255 1
no…
Removes any existing configuration.
— —
Usage Guidelines
Use this command to configure values for the H2QP Operating Class profile that lists the channels on which
the hotspot is capable of operating.
Example
The following example configures and enables a profile with the default operating class value.
(Instant AP)(config) # hotspot h2qp-oper-class-profile Profile1
(Instant AP)(operator-class"Profile1")# op-class 1
(Instant AP)(operator-class"Profile1")# enable
(Instant AP)(operator-class"Profile1")# end
(Instant AP)# commit apply
Command History
Version Description
Dell Networking W-Series Instant 6.2.1.0-
3.3
This command is introduced.