Concept Guide
Table Of Contents
- About this Guide
- About Instant
- Setting up a W-IAP
- Automatic Retrieval of Configuration
- Instant User Interface
- Initial Configuration Tasks
- Basic Configuration Tasks
- Additional Configuration Tasks
- Customizing W-IAP Settings
- Modifying the W-IAP Hostname
- Configuring Zone Settings on a W-IAP
- Specifying a Method for Obtaining IP Address
- Configuring External Antenna
- Configuring Radio Profiles for a W-IAP
- Configuring Uplink VLAN for a W-IAP
- Changing USB Port Status
- Master Election and Virtual Controller
- Adding a W-IAP to the Network
- Removing a W-IAP from the Network
- VLAN Configuration
- Wireless Network Profiles
- Configuring Wireless Network Profiles
- Configuring Fast Roaming for Wireless Clients
- Editing Status of a WLAN SSID Profile
- Editing a WLAN SSID Profile
- Deleting a WLAN SSID Profile
- Wired Profiles
- Configuring a Wired Profile
- Assigning a Profile to Ethernet Ports
- Editing a Wired Profile
- Deleting a Wired Profile
- Link Aggregation Control Protocol
- Understanding Hierarchical Deployment
- Captive Portal for Guest Access
- Understanding Captive Portal
- Configuring a WLAN SSID for Guest Access
- Configuring Wired Profile for Guest Access
- Configuring Internal Captive Portal for Guest Network
- wConfiguring External Captive Portal for a Guest Network
- Configuring Facebook Login
- Configuring Guest Logon Role and Access Rules for Guest Users
- Configuring Captive Portal Roles for an SSID
- Configuring Walled Garden Access
- Authentication and User Management
- Managing W-IAP Users
- Supported Authentication Methods
- Supported EAP Authentication Frameworks
- Configuring Authentication Servers
- Understanding Encryption Types
- Configuring Authentication Survivability
- Configuring 802.1X Authentication for a Network Profile
- Configuring MAC Authentication for a Network Profile
- FConfiguring MAC Authentication with 802.1X Authentication
- hConfiguring MAC Authentication with Captive Portal Authentication
- Configuring WISPr Authentication
- Blacklisting Clients
- Uploading Certificates
- Roles and Policies
- Firewall Policies
- Content Filtering
- Configuring User Roles
- Configuring Derivation Rules
- Using Advanced Expressions in Role and VLAN Derivation Rules
- DHCP Configuration
- VPN Configuration
- IAP-VPN Deployment
- Adaptive Radio Management
- Deep Packet Inspection and Application Visibility
- Voice and Video
- Services
- AirGroup Configuration
- Configuring a W-IAP for RTLS Support
- Configuring a W-IAP for Analytics and Location Engine Support
- Configuring OpenDNS Credentials
- Integrating a W-IAP with Palo Alto Networks Firewall
- Integrating a W-IAP with an XML API interface
- CALEA Integration and Lawful Intercept Compliance
- W-IAP Management and Monitoring
- Managing a W-IAP from W-AirWave
- Image Management
- Resetting a W-IAP
- W-IAP and Client Monitoring
- Template-based Configuration
- Trending Reports
- Intrusion Detection System
- Wireless Intrusion Detection System (WIDS) Event Reporting to W-AirWave
- RF Visualization Support for Instant
- PSK-based and Certificate-based Authentication
- Configurable Port for W-IAP and W-AirWave Management Server Communication
- Configuring Organization String
- Managing a W-IAP from W-AirWave
- Uplink Configuration
- Intrusion Detection
- Mesh W-IAP Configuration
- Mobility and Client Management
- Spectrum Monitor
- W-IAP Maintenance
- Monitoring Devices and Logs
- Hotspot Profiles
- Understanding Hotspot Profiles
- Configuring Hotspot Profiles
- Creating Advertisement Profiles for Hotspot Configuration
- Configuring an NAI Realm Profile
- Configuring a Venue Name Profile
- Configuring a Network Authentication Profile
- Configuring a Roaming Consortium Profile
- Configuring a 3GPP Profile
- Configuring an IP Address Availability Profile
- Configuring a Domain Profile
- Configuring an Operator-friendly Profile
- Configuring a Connection Capability Profile
- Configuring an Operating Class Profile
- Configuring a WAN Metrics Profile
- Creating a Hotspot Profile
- Associating an Advertisement Profile to a Hotspot Profile
- Creating a WLAN SSID and Associating Hotspot Profile
- Creating Advertisement Profiles for Hotspot Configuration
- Sample Configuration
- ClearPass Guest Setup
- IAP-VPN Deployment Scenarios
- Terminology
Type and
Description
Code
Description Details Corrective Actions
100410 Integrity check failure in
encrypted message
The AP cannot receive data
from this client because the
integrity check of the
received message (MIC)
has failed. Recommend
checking the encryption
setting on the client and on
the AP.
Check the encryption setting on
the client and on the W-IAP.
100511 DHCP request timed out
This client did not receive a
response to its DHCP
request in time.
Recommend checking the
status of the DHCP server in
the network.
Check the status of the DHCP
server in the network.
101012 Wrong Client VLAN VLAN mismatch between
the W-IAP and upstream
device. Upstream device
can be upstream switch or
RADIUS server.
Table 16: Alerts list
IDS
The IDSlink displays a list of foreign APs and foreign clients that are detected in the network. It consists of the
following sections:
l Foreign Access Points Detected— Lists the APs that are not controlled by the Virtual Controller. The
following information is displayed for each foreign AP:
n MAC address— Displays the MAC address of the foreign AP.
n Network— Displays the name of the network to which the foreign AP is connected.
n Classification— Displays the classification of the foreign AP, for example, Interfering W-IAP or Rogue W-
IAP.
n Channel— Displays the channel in which the foreign AP is operating.
n Type— Displays the Wi-Fi type of the foreign AP.
n Last seen— Displays the time when the foreign AP was last detected in the network.
n Where— Provides information about the W-IAP that detected the foreign AP. Click the pushpin icon to
view the information.
l Foreign Clients Detected— Lists the clients that are not controlled by the Virtual Controller. The following
information is displayed for each foreign client:
n MAC address— Displays the MAC address of the foreign client.
n Network— Displays the name of the network to which the foreign client is connected.
n Classification— Displays the classification of the foreign client: Interfering client.
n Channel— Displays the channel in which the foreign client is operating.
n Type— Displays the Wi-Fi type of the foreign client.
Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | User Guide Instant User Interface | 73