Concept Guide

The following table describes the graphs displayed in the Network view:
Graph Name Description Monitoring Procedure
Clients The Clients graph shows the number of clients
associated with the network for the last 15
minutes.
To see an enlarged view, click the graph.
l The enlarged view provides Last, Minimum,
Maximum, and Average statistics for the
number of clients associated with the Virtual
Controller for the last 15 minutes.
l To see the exact number of clients in the
Instant network at a particular time, move
the cursor over the graph line.
To check the number of clients associated
with the network for the last 15 minutes,
1. Log in to the Instant UI. The Virtual
Controller view appears. This is the
default view.
2. On the Networks tab, click the network
for which you want to check the client
association. The Network view is
displayed.
3. Study the Clients graph in the Usage
Trends pane. For example, the graph
shows that one client is associated with
the selected network at 12:00 hours.
Throughput The Throughput graph shows the throughput of
the selected network for the last 15 minutes.
l Outgoing traffic—Throughput for outgoing
traffic is displayed in green. Outgoing traffic
is shown above the median line.
l Incoming traffic—Throughput for incoming
traffic is displayed in blue. Incoming traffic is
shown below the median line.
To see an enlarged view, click the graph.
l The enlarged view provides Last, Minimum,
Maximum, and Average statistics for the
incoming and outgoing traffic throughput of
the network for the last 15 minutes.
To see the exact throughput of the selected
network at a particular time, move the cursor
over the graph line.
To check the throughput of the selected
network for the last 15 minutes,
1. Log in to the Instant UI. The Virtual
Controller view is displayed. This is the
default view.
2. On the Networks tab, click the network
for which you want to check the client
association. The Network view is
displayed.
3. Study the Throughput graph in the
Usage Trends pane. For example, the
graph shows 22.0 Kbps incoming traffic
throughput for the selected network at
12:03 hours.
Table 12: Network View—Graphs and Monitoring Procedures
Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | User Guide Instant User Interface | 63