Concept Guide

58 | Instant User Interface Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | User Guide
Name Description
Info section in Virtual
Controller view
The Info section in the Virtual Controller view displays the following information:
l Name— Displays the Virtual Controller name.
l Country Code— Displays the Country in which the Virtual Controller is
operating.
l Virtual Controller IP address— Displays the IP address of the Virtual
Controller.
l VC DNS—Displays the DNS IP address configured for Virtual Controller.
l Management: Indicates if the W-IAP is managed locally or through W-AirWave.
l Master— Displays the IP address of the Access Point acting as Virtual
Controller.
l OpenDNS Status— Displays the OpenDNS status. If the OpenDNS status
indicates Not Connected, ensure that the network connection is up and
appropriate credentials are configured for OpenDNS.
l Uplink type—Displays the type of uplink configured on the W-IAP, for
example, Ethernet or 3G.
l Uplink status—Indicates the uplink status.
l Blacklisted clients—Displays the number of blacklisted clients.
l Internal RADIUS Users—Displays the number of internal RADIUSusers.
l Internal Guest Users—Displays the number of internal guest users.
l Internal User Open Slots— Displays the available slots for user configuration
as supported by the W-IAP model.
Info section in Network view The Info section in the Network view displays the following information:
l Name—Displays the name of the network.
l Status—Displays the status of the network.
l Type—Displays the type of network, for example, Employee, Guest, or Voice.
l VLAN—Displays VLAN details.
l IP Assignment— Indicates if the W-IAP clients are assigned IP address from
the network that the Virtual Controller is connected to, or from an internal
auto-generated IP scope from the Virtual Controller.
l Access— Indicates the level of access control configured for the network.
l WMM DSCP—Displays WMMDSCP mapping details.
l Security level— Indicates the type of user authentication and data encryption
configured for the network.
The info section for WLAN SSIDs also indicates status of captive portal and CALEA
ACLs and provides a link to upload certificates for internal server. For more
information, see Uploading Certificates on page 186.
Info section in Access Point
view
The Info section in the Access Point view displays the following information:
l Name—Displays the name of the selected W-IAP.
l IP Address—Displays the IP address of the W-IAP.
Table 10: Contents of the Info Section in the Instant Main Window