Concept Guide

50 | Instant User Interface Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | User Guide
Clients Tab
This tab displays a list of clients that are connected to the Instant network. The client names are displayed as
links. The expanded view displays the following information about each client:
l Name—User name of the client or guest users if available.
l IP Address—IP address of the client.
l MAC Address—MAC address of the client.
l OS—Operating system that runs on the client.
l ESSID—The ESSID to which the client is connected.
l Access Point—to which the client is connected.
l Channel—The client operating channel.
l Type—Type of the Wi-Fi client.
l Role—Role assigned to the client.
l Signal—Current signal strength of the client, as detected by the AP.
l Speed (mbps)—Current speed at which data is transmitted. When the client is associated with an AP, it
constantly negotiates the speed of data transfer. A value of 0 means that the AP has not heard from the
client for some time.
Links
l The following links allow you to configure various features for the Instant network:
l New Version Available
l System
l RF
l Security
l Maintenance
l More
l Help
l Logout
l Monitoring
l Client Match
l AppRF
l Spectrum
l Alerts
l IDS
l Configuration
l AirGroup
l W-AirWave Setup
l Pause/Resume
Each of these links is explained in the subsequent sections.
New Version Available
This link is displayed in the top right corner of the Instant main window only if a new image version is available
on the image server and W-AirWave is not configured. For more information about the New version
available link and its functions, see Upgrading a W-IAP on page 340.