Concept Guide
Table Of Contents
- About this Guide
- About Instant
- Setting up a W-IAP
- Automatic Retrieval of Configuration
- Instant User Interface
- Initial Configuration Tasks
- Basic Configuration Tasks
- Additional Configuration Tasks
- Customizing W-IAP Settings
- Modifying the W-IAP Hostname
- Configuring Zone Settings on a W-IAP
- Specifying a Method for Obtaining IP Address
- Configuring External Antenna
- Configuring Radio Profiles for a W-IAP
- Configuring Uplink VLAN for a W-IAP
- Changing USB Port Status
- Master Election and Virtual Controller
- Adding a W-IAP to the Network
- Removing a W-IAP from the Network
- VLAN Configuration
- Wireless Network Profiles
- Configuring Wireless Network Profiles
- Configuring Fast Roaming for Wireless Clients
- Editing Status of a WLAN SSID Profile
- Editing a WLAN SSID Profile
- Deleting a WLAN SSID Profile
- Wired Profiles
- Configuring a Wired Profile
- Assigning a Profile to Ethernet Ports
- Editing a Wired Profile
- Deleting a Wired Profile
- Link Aggregation Control Protocol
- Understanding Hierarchical Deployment
- Captive Portal for Guest Access
- Understanding Captive Portal
- Configuring a WLAN SSID for Guest Access
- Configuring Wired Profile for Guest Access
- Configuring Internal Captive Portal for Guest Network
- wConfiguring External Captive Portal for a Guest Network
- Configuring Facebook Login
- Configuring Guest Logon Role and Access Rules for Guest Users
- Configuring Captive Portal Roles for an SSID
- Configuring Walled Garden Access
- Authentication and User Management
- Managing W-IAP Users
- Supported Authentication Methods
- Supported EAP Authentication Frameworks
- Configuring Authentication Servers
- Understanding Encryption Types
- Configuring Authentication Survivability
- Configuring 802.1X Authentication for a Network Profile
- Configuring MAC Authentication for a Network Profile
- FConfiguring MAC Authentication with 802.1X Authentication
- hConfiguring MAC Authentication with Captive Portal Authentication
- Configuring WISPr Authentication
- Blacklisting Clients
- Uploading Certificates
- Roles and Policies
- Firewall Policies
- Content Filtering
- Configuring User Roles
- Configuring Derivation Rules
- Using Advanced Expressions in Role and VLAN Derivation Rules
- DHCP Configuration
- VPN Configuration
- IAP-VPN Deployment
- Adaptive Radio Management
- Deep Packet Inspection and Application Visibility
- Voice and Video
- Services
- AirGroup Configuration
- Configuring a W-IAP for RTLS Support
- Configuring a W-IAP for Analytics and Location Engine Support
- Configuring OpenDNS Credentials
- Integrating a W-IAP with Palo Alto Networks Firewall
- Integrating a W-IAP with an XML API interface
- CALEA Integration and Lawful Intercept Compliance
- W-IAP Management and Monitoring
- Managing a W-IAP from W-AirWave
- Image Management
- Resetting a W-IAP
- W-IAP and Client Monitoring
- Template-based Configuration
- Trending Reports
- Intrusion Detection System
- Wireless Intrusion Detection System (WIDS) Event Reporting to W-AirWave
- RF Visualization Support for Instant
- PSK-based and Certificate-based Authentication
- Configurable Port for W-IAP and W-AirWave Management Server Communication
- Configuring Organization String
- Managing a W-IAP from W-AirWave
- Uplink Configuration
- Intrusion Detection
- Mesh W-IAP Configuration
- Mobility and Client Management
- Spectrum Monitor
- W-IAP Maintenance
- Monitoring Devices and Logs
- Hotspot Profiles
- Understanding Hotspot Profiles
- Configuring Hotspot Profiles
- Creating Advertisement Profiles for Hotspot Configuration
- Configuring an NAI Realm Profile
- Configuring a Venue Name Profile
- Configuring a Network Authentication Profile
- Configuring a Roaming Consortium Profile
- Configuring a 3GPP Profile
- Configuring an IP Address Availability Profile
- Configuring a Domain Profile
- Configuring an Operator-friendly Profile
- Configuring a Connection Capability Profile
- Configuring an Operating Class Profile
- Configuring a WAN Metrics Profile
- Creating a Hotspot Profile
- Associating an Advertisement Profile to a Hotspot Profile
- Creating a WLAN SSID and Associating Hotspot Profile
- Creating Advertisement Profiles for Hotspot Configuration
- Sample Configuration
- ClearPass Guest Setup
- IAP-VPN Deployment Scenarios
- Terminology
l 10.2.2.0/24 is a branch owned subnet, which needs to override global routing profile
l 199.127.104.32 is used an example IP address of the W-AirWave server in the Internet
AP Configuration
The following table provides information on the configuration steps performed through the CLI with example
values. For information on the UI procedures, see the topics referenced in the UINavigation Details column.
Configuration Steps CLI Commands UI Procedure
1. Configure the primary
host for VPN with the
Public VRRP IP address of
the controller.
(ap)(config)# vpn primary <public VRRP IP of
controller>
See
Configuring an
IPSec Tunnel
2. Configure routing
profiles to tunnel traffic
through IPSec.
(ap)(config)# routing-profile
(ap)(routing-profile)# route 0.0.0.0 0.0.0.0 <public VRRP IP of
controller>
See
Configuring
Routing
Profiles
3. Define routing profile
exception RADIUS server
and W-AirWave IPs, since
the design requirement
for this solution requires
local RADIUS
authentication, even
though the IP matches
the routing profile
destination.
(ap)(config)# routing-profile
(ap)(routing-profile)# route 10.2.2.1
255.255.255.255 0.0.0.0
(ap)(routing-profile)# route 10.2.2.2
255.255.255.255 0.0.0.0
(ap)(routing-profile)# route 199.127.104.32
255.255.255.255 0.0.0.0
See
Configuring
Routing
Profiles
4. Configure Enterprise
DNS. The configuration
example in the next
column tunnels all DNS
queries to the original
DNS server of clients
without proxying on W-
IAP.
(ap)(config)# internal-domains
(ap)(domains)# domain-name *
See
Configuring
Enterprise
Domains
5. Configure centralized L2
and distributed L3 with
VLAN 20 and 30
respectively.
Centralized L2 profile
(ap)(config)# ip dhcp l2-dhcp
(ap)(DHCP Profile "l2-dhcp")# server-type
Centralized,L2
(ap)(DHCP Profile "l2-dhcp")# server-vlan 20
Distributed L3 profile
(ap)(config)# ip dhcp l3-dhcp
(ap)(DHCP Profile "l3-dhcp")# server-type
Distributed,L3
(ap)(DHCP Profile "l3-dhcp")# server-vlan 30
(ap)(DHCP Profile "l3-dhcp")# ip-range 10.30.0.0
10.30.255.255
(ap)(DHCP Profile "l3-dhcp")# dns-server
10.1.1.50,10.1.1.30
(ap)(DHCP Profile "l3-dhcp")# domain-name
corpdomain.com
(ap)(DHCP Profile "l3-dhcp")# client-count 200
See
Configuring
Centralized
DHCP Scopes
and
Configuring
Distributed
DHCP Scopes
Table 76: W-IAP Configuration for Scenario 2—IPSec: Single Datacenter with Multiple controllers for Redundancy
Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | User Guide IAP-VPN Deployment Scenarios | 386