Concept Guide
Table Of Contents
- About this Guide
- About Instant
- Setting up a W-IAP
- Automatic Retrieval of Configuration
- Instant User Interface
- Initial Configuration Tasks
- Basic Configuration Tasks
- Additional Configuration Tasks
- Customizing W-IAP Settings
- Modifying the W-IAP Hostname
- Configuring Zone Settings on a W-IAP
- Specifying a Method for Obtaining IP Address
- Configuring External Antenna
- Configuring Radio Profiles for a W-IAP
- Configuring Uplink VLAN for a W-IAP
- Changing USB Port Status
- Master Election and Virtual Controller
- Adding a W-IAP to the Network
- Removing a W-IAP from the Network
- VLAN Configuration
- Wireless Network Profiles
- Configuring Wireless Network Profiles
- Configuring Fast Roaming for Wireless Clients
- Editing Status of a WLAN SSID Profile
- Editing a WLAN SSID Profile
- Deleting a WLAN SSID Profile
- Wired Profiles
- Configuring a Wired Profile
- Assigning a Profile to Ethernet Ports
- Editing a Wired Profile
- Deleting a Wired Profile
- Link Aggregation Control Protocol
- Understanding Hierarchical Deployment
- Captive Portal for Guest Access
- Understanding Captive Portal
- Configuring a WLAN SSID for Guest Access
- Configuring Wired Profile for Guest Access
- Configuring Internal Captive Portal for Guest Network
- wConfiguring External Captive Portal for a Guest Network
- Configuring Facebook Login
- Configuring Guest Logon Role and Access Rules for Guest Users
- Configuring Captive Portal Roles for an SSID
- Configuring Walled Garden Access
- Authentication and User Management
- Managing W-IAP Users
- Supported Authentication Methods
- Supported EAP Authentication Frameworks
- Configuring Authentication Servers
- Understanding Encryption Types
- Configuring Authentication Survivability
- Configuring 802.1X Authentication for a Network Profile
- Configuring MAC Authentication for a Network Profile
- FConfiguring MAC Authentication with 802.1X Authentication
- hConfiguring MAC Authentication with Captive Portal Authentication
- Configuring WISPr Authentication
- Blacklisting Clients
- Uploading Certificates
- Roles and Policies
- Firewall Policies
- Content Filtering
- Configuring User Roles
- Configuring Derivation Rules
- Using Advanced Expressions in Role and VLAN Derivation Rules
- DHCP Configuration
- VPN Configuration
- IAP-VPN Deployment
- Adaptive Radio Management
- Deep Packet Inspection and Application Visibility
- Voice and Video
- Services
- AirGroup Configuration
- Configuring a W-IAP for RTLS Support
- Configuring a W-IAP for Analytics and Location Engine Support
- Configuring OpenDNS Credentials
- Integrating a W-IAP with Palo Alto Networks Firewall
- Integrating a W-IAP with an XML API interface
- CALEA Integration and Lawful Intercept Compliance
- W-IAP Management and Monitoring
- Managing a W-IAP from W-AirWave
- Image Management
- Resetting a W-IAP
- W-IAP and Client Monitoring
- Template-based Configuration
- Trending Reports
- Intrusion Detection System
- Wireless Intrusion Detection System (WIDS) Event Reporting to W-AirWave
- RF Visualization Support for Instant
- PSK-based and Certificate-based Authentication
- Configurable Port for W-IAP and W-AirWave Management Server Communication
- Configuring Organization String
- Managing a W-IAP from W-AirWave
- Uplink Configuration
- Intrusion Detection
- Mesh W-IAP Configuration
- Mobility and Client Management
- Spectrum Monitor
- W-IAP Maintenance
- Monitoring Devices and Logs
- Hotspot Profiles
- Understanding Hotspot Profiles
- Configuring Hotspot Profiles
- Creating Advertisement Profiles for Hotspot Configuration
- Configuring an NAI Realm Profile
- Configuring a Venue Name Profile
- Configuring a Network Authentication Profile
- Configuring a Roaming Consortium Profile
- Configuring a 3GPP Profile
- Configuring an IP Address Availability Profile
- Configuring a Domain Profile
- Configuring an Operator-friendly Profile
- Configuring a Connection Capability Profile
- Configuring an Operating Class Profile
- Configuring a WAN Metrics Profile
- Creating a Hotspot Profile
- Associating an Advertisement Profile to a Hotspot Profile
- Creating a WLAN SSID and Associating Hotspot Profile
- Creating Advertisement Profiles for Hotspot Configuration
- Sample Configuration
- ClearPass Guest Setup
- IAP-VPN Deployment Scenarios
- Terminology
Configuration Steps CLI Commands UI Procedure
1. Configure the primary
host for VPN with the
Public VRRP IP address of
the controller.
(ap)(config)# vpn primary <public VRRP IP of
controller>
See
Configuring an
IPSec Tunnel
2. Configure a routing
profile to tunnel all
10.0.0.0/8 subnet traffic
to controller.
(ap)(config)# routing-profile
(ap)(routing-profile)# route 10.0.0.0 255.0.0.0 <public VRRP IP of
controller>
See
Configuring
Routing
Profiles
3. Configure Enterprise
DNS for split DNS. The
example in the next
column uses a specific
enterprise domain to
only tunnel all DNS
queries matching that
domain to corporate.
(ap)(config)# internal-domains
(ap)(domains)# domain-name corpdomain.com
See
Configuring
Enterprise
Domains
4. Configure centralized L2
and distributed L3 with
VLAN 20 and 30
respectively.
Centralized L2 profile (ap)(config)# ip dhcp l2-dhcp
(ap)(DHCP Profile "l2-dhcp")# server-type
Centralized,L2
(ap)(DHCP Profile "l2-dhcp")# server-vlan 20
Distributed L3 profile
(ap)(config)# ip dhcp l3-dhcp
(ap)(DHCP Profile "l3-dhcp")# server-type
Distributed,L3
(ap)(DHCP Profile "l3-dhcp")# server-vlan 30
(ap)(DHCP Profile "l3-dhcp")# ip-range 10.30.0.0
10.30.255.255
(ap)(DHCP Profile "l3-dhcp")# dns-server
10.1.1.50,10.1.1.30
(ap)(DHCP Profile "l3-dhcp")# domain-name
corpdomain.com
(ap)(DHCP Profile "l3-dhcp")# client-count 200
NOTE: The IP range configuration on each branch will be the
same. Each W-IAP will derive a smaller subnet based on the client
count scope using the Branch ID (BID) allocated by controller.
See
Configuring
Centralized
DHCP Scopes
and
Configuring
Distributed
DHCP Scopes
5. Create authentication
servers for user
authentication. The
example in the next
column assumes 802.1X
SSID.
(ap)(config)# wlan auth-server server1
(ap)(Auth Server "server1")# ip 10.2.2.1
(ap)(Auth Server "server1")# port 1812
(ap)(Auth Server "server1")# acctport 1813
(ap)(Auth Server "server1")# key "presharedkey"
(ap)(Auth Server "server1")# exit
(ap)(config)# wlan auth-server server2
(ap)(Auth Server "server2")# ip 10.2.2.2
(ap)(Auth Server "server2")# port 1812
(ap)(Auth Server "server2")# acctport 1813
(ap)(Auth Server "server2")# key "presharedkey"
See
Configuring an
External Server
for
Authentication
6. Configure wired and
wireless SSIDs using the
Configure wired ports to operate in L2 mode and associate
centralized L2 mode VLAN 20 to the wired port profile.
See
Configuring a
Table 75: W-IAP Configuration for Scenario 1—IPSec: Single Datacenter Deployment with No Redundancy
Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | User Guide IAP-VPN Deployment Scenarios | 382