Concept Guide
Table Of Contents
- About this Guide
- About Instant
- Setting up a W-IAP
- Automatic Retrieval of Configuration
- Instant User Interface
- Initial Configuration Tasks
- Basic Configuration Tasks
- Additional Configuration Tasks
- Customizing W-IAP Settings
- Modifying the W-IAP Hostname
- Configuring Zone Settings on a W-IAP
- Specifying a Method for Obtaining IP Address
- Configuring External Antenna
- Configuring Radio Profiles for a W-IAP
- Configuring Uplink VLAN for a W-IAP
- Changing USB Port Status
- Master Election and Virtual Controller
- Adding a W-IAP to the Network
- Removing a W-IAP from the Network
- VLAN Configuration
- Wireless Network Profiles
- Configuring Wireless Network Profiles
- Configuring Fast Roaming for Wireless Clients
- Editing Status of a WLAN SSID Profile
- Editing a WLAN SSID Profile
- Deleting a WLAN SSID Profile
- Wired Profiles
- Configuring a Wired Profile
- Assigning a Profile to Ethernet Ports
- Editing a Wired Profile
- Deleting a Wired Profile
- Link Aggregation Control Protocol
- Understanding Hierarchical Deployment
- Captive Portal for Guest Access
- Understanding Captive Portal
- Configuring a WLAN SSID for Guest Access
- Configuring Wired Profile for Guest Access
- Configuring Internal Captive Portal for Guest Network
- wConfiguring External Captive Portal for a Guest Network
- Configuring Facebook Login
- Configuring Guest Logon Role and Access Rules for Guest Users
- Configuring Captive Portal Roles for an SSID
- Configuring Walled Garden Access
- Authentication and User Management
- Managing W-IAP Users
- Supported Authentication Methods
- Supported EAP Authentication Frameworks
- Configuring Authentication Servers
- Understanding Encryption Types
- Configuring Authentication Survivability
- Configuring 802.1X Authentication for a Network Profile
- Configuring MAC Authentication for a Network Profile
- FConfiguring MAC Authentication with 802.1X Authentication
- hConfiguring MAC Authentication with Captive Portal Authentication
- Configuring WISPr Authentication
- Blacklisting Clients
- Uploading Certificates
- Roles and Policies
- Firewall Policies
- Content Filtering
- Configuring User Roles
- Configuring Derivation Rules
- Using Advanced Expressions in Role and VLAN Derivation Rules
- DHCP Configuration
- VPN Configuration
- IAP-VPN Deployment
- Adaptive Radio Management
- Deep Packet Inspection and Application Visibility
- Voice and Video
- Services
- AirGroup Configuration
- Configuring a W-IAP for RTLS Support
- Configuring a W-IAP for Analytics and Location Engine Support
- Configuring OpenDNS Credentials
- Integrating a W-IAP with Palo Alto Networks Firewall
- Integrating a W-IAP with an XML API interface
- CALEA Integration and Lawful Intercept Compliance
- W-IAP Management and Monitoring
- Managing a W-IAP from W-AirWave
- Image Management
- Resetting a W-IAP
- W-IAP and Client Monitoring
- Template-based Configuration
- Trending Reports
- Intrusion Detection System
- Wireless Intrusion Detection System (WIDS) Event Reporting to W-AirWave
- RF Visualization Support for Instant
- PSK-based and Certificate-based Authentication
- Configurable Port for W-IAP and W-AirWave Management Server Communication
- Configuring Organization String
- Managing a W-IAP from W-AirWave
- Uplink Configuration
- Intrusion Detection
- Mesh W-IAP Configuration
- Mobility and Client Management
- Spectrum Monitor
- W-IAP Maintenance
- Monitoring Devices and Logs
- Hotspot Profiles
- Understanding Hotspot Profiles
- Configuring Hotspot Profiles
- Creating Advertisement Profiles for Hotspot Configuration
- Configuring an NAI Realm Profile
- Configuring a Venue Name Profile
- Configuring a Network Authentication Profile
- Configuring a Roaming Consortium Profile
- Configuring a 3GPP Profile
- Configuring an IP Address Availability Profile
- Configuring a Domain Profile
- Configuring an Operator-friendly Profile
- Configuring a Connection Capability Profile
- Configuring an Operating Class Profile
- Configuring a WAN Metrics Profile
- Creating a Hotspot Profile
- Associating an Advertisement Profile to a Hotspot Profile
- Creating a WLAN SSID and Associating Hotspot Profile
- Creating Advertisement Profiles for Hotspot Configuration
- Sample Configuration
- ClearPass Guest Setup
- IAP-VPN Deployment Scenarios
- Terminology
37 | Setting up a W-IAP Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | User Guide
Assigning a Static IP
To assign a static IP to a W-IAP:
1. Connect a terminal, PC, or workstation running a terminal emulation program to the Console port on the
W-IAP.
2. Power on the W-IAP. An autoboot countdown prompt that allows you to interrupt the normal startup
process and access apboot is displayed.
3. Click Enter before the timer expires. The W-IAP goes into the apboot mode.
4. In the apboot mode, use the following commands to assign a static IP to the W-IAP.
Hit <Enter> to stop autoboot: 0
apboot>
apboot> setenv ipaddr 192.0.2.0
apboot> setenv netmask 255.255.255.0
apboot> setenv gatewayip 192.0.2.2
apboot> save
Saving Environment to Flash...
Un-Protected 1 sectors
.done
Erased 1 sectors
Writing
5. Use the printenv command to view the configuration.
apboot> printenv
Connecting to a Provisioning Wi-Fi Network
The W-IAPs boot with factory default configuration and try to provision automatically. If the automatic
provisioning is successful, the instant SSID will not be available. If W-AirWave and Activate are not reachable
and the automatic provisioning fails, the instant SSID becomes available and the users can connect to a
provisioning network by using the instant SSID.
To connect to a provisioning Wi-Fi network:
1. Ensure that the client is not connected to any wired network.
2. Connect a wireless enabled client to a provisioning Wi-Fi network: for example, instant.
3. If the Windows OS system is used:
a. Click the wireless network connection icon in the system tray. The Wireless Network Connection
window is displayed.
b. Click on the instant network and then click Connect.
4. If the Mac OS system is used:
a. Click the AirPort icon. A list of available Wi-Fi networks is displayed.
b. Click on the instant network.
The instant SSIDs are broadcast in 2.4 GHz only.
W-IAP Cluster
W-IAPs in the same VLAN automatically find each other and form a single functioning network managed by a
Virtual Controller.
Moving a W-IAP from one cluster to another requires a factory reset of the W-IAP.