Concept Guide

Authentication ID
Authentication Value
eap-inner-auth
l Uses EAP inner authentication type.
l The associated numeric value is 3.
The following authentication values apply:
l reserved— The associated numeric value is 0.
l pap—The associated numeric value is 1.
l chap—The associated numeric value is 2.
l mschap—The associated numeric value is 3.
l mschapv2—The associated numeric value is 4.
exp-inner-eap
l Uses the expanded inner EAP
authentication method.
l The associated numeric value is 4.
Use the exp-inner-eap authentication value.
credential
l Uses credential authentication.
l The associated numeric value is 5.
The following authentication values apply:
l sim— The associated numeric value is 1.
l usim— The associated numeric value is 2.
l nfc-secure— The associated numeric value is 3.
l hw-token— The associated numeric value is 4.
l softoken— The associated numeric value is 5.
l certificate— The associated numeric value is 6.
l uname-passward—The associated numeric value is 7.
l none—The associated numeric value is 8.
l reserved—The associated numeric value is 9.
l vendor-specific—The associated numeric value is 10.
Table 70: NAI Realm Profile Configuration Parameters
Configuring a Venue Name Profile
You configure a venue name profile to send venue information as an ANQP IE in a GAS query response. To
configure a venue name profile, enter the following commands at the command prompt:
(Instant AP)(config)# hotspot anqp-venue-name-profile <name>
(Instant AP)(venue-name <name>)# venue-name <name>
(Instant AP)(venue-name <name>)# venue-group <group-name>
(Instant AP)(venue-name <name>)# venue-type <type>
(Instant AP)(venue-name <name>)# venue-lang-code <language>
(Instant AP)(venue-name <name>)# enable
(Instant AP)(venue-name <name>)# end
(Instant AP)# commit apply
You can specify any of the following venue groups and the corresponding venue types:
Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | User Guide Hotspot Profiles | 365