Concept Guide

297 | W-IAP Management and Monitoring Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | User Guide
Read/Write, the Instant UI is in read-only mode. If W-AirWave Management Level is set to Monitor-
only+Firmware Upgrades mode, the Instant UI changes to the read-write mode.
Template-based Configuration
W-AirWave automatically creates a configuration template based on any of the existing W-IAPs, and it applies
that template across the network as shown in the following figure. It audits every device on an ongoing basis to
ensure that configurations never vary from the enterprise policies. It alerts you whenever a violation is
detected and automatically repairs the incorrectly configured devices.
Figure 83 Template-based Configuration
Trending Reports
W-AirWave saves up to 14 months of actionable information, including network performance data and user
roaming patterns, so you can analyze how network usage and performance trends have changed over time. It
also provides detailed capacity reports with which you can plan the capacity and appropriate strategies for
your organization.
Intrusion Detection System
W-AirWave provides advanced, rules-based rogue classification. It automatically detects rogue APs irrespective
of their location in the network and prevents authorized W-IAPs from being detected as rogue W-IAPs. It tracks
and correlates the IDS events to provide a complete picture of network security.
Wireless Intrusion Detection System (WIDS) Event Reporting to W-AirWave
W-AirWave supports Wireless Intrusion Detection System (WIDS) Event Reporting, which is provided by Instant.
This includes WIDS classification integration with the RAPIDS (Rogue Access Point Detection Software) module.
RAPIDS is a powerful and easy-to-use tool for automatic detection of unauthorized wireless devices. It
supports multiple methods of rogue detection and uses authorized wireless APs to report other devices within
range.