Concept Guide
Table Of Contents
- About this Guide
- About Instant
- Setting up a W-IAP
- Automatic Retrieval of Configuration
- Instant User Interface
- Initial Configuration Tasks
- Basic Configuration Tasks
- Additional Configuration Tasks
- Customizing W-IAP Settings
- Modifying the W-IAP Hostname
- Configuring Zone Settings on a W-IAP
- Specifying a Method for Obtaining IP Address
- Configuring External Antenna
- Configuring Radio Profiles for a W-IAP
- Configuring Uplink VLAN for a W-IAP
- Changing USB Port Status
- Master Election and Virtual Controller
- Adding a W-IAP to the Network
- Removing a W-IAP from the Network
- VLAN Configuration
- Wireless Network Profiles
- Configuring Wireless Network Profiles
- Configuring Fast Roaming for Wireless Clients
- Editing Status of a WLAN SSID Profile
- Editing a WLAN SSID Profile
- Deleting a WLAN SSID Profile
- Wired Profiles
- Configuring a Wired Profile
- Assigning a Profile to Ethernet Ports
- Editing a Wired Profile
- Deleting a Wired Profile
- Link Aggregation Control Protocol
- Understanding Hierarchical Deployment
- Captive Portal for Guest Access
- Understanding Captive Portal
- Configuring a WLAN SSID for Guest Access
- Configuring Wired Profile for Guest Access
- Configuring Internal Captive Portal for Guest Network
- wConfiguring External Captive Portal for a Guest Network
- Configuring Facebook Login
- Configuring Guest Logon Role and Access Rules for Guest Users
- Configuring Captive Portal Roles for an SSID
- Configuring Walled Garden Access
- Authentication and User Management
- Managing W-IAP Users
- Supported Authentication Methods
- Supported EAP Authentication Frameworks
- Configuring Authentication Servers
- Understanding Encryption Types
- Configuring Authentication Survivability
- Configuring 802.1X Authentication for a Network Profile
- Configuring MAC Authentication for a Network Profile
- FConfiguring MAC Authentication with 802.1X Authentication
- hConfiguring MAC Authentication with Captive Portal Authentication
- Configuring WISPr Authentication
- Blacklisting Clients
- Uploading Certificates
- Roles and Policies
- Firewall Policies
- Content Filtering
- Configuring User Roles
- Configuring Derivation Rules
- Using Advanced Expressions in Role and VLAN Derivation Rules
- DHCP Configuration
- VPN Configuration
- IAP-VPN Deployment
- Adaptive Radio Management
- Deep Packet Inspection and Application Visibility
- Voice and Video
- Services
- AirGroup Configuration
- Configuring a W-IAP for RTLS Support
- Configuring a W-IAP for Analytics and Location Engine Support
- Configuring OpenDNS Credentials
- Integrating a W-IAP with Palo Alto Networks Firewall
- Integrating a W-IAP with an XML API interface
- CALEA Integration and Lawful Intercept Compliance
- W-IAP Management and Monitoring
- Managing a W-IAP from W-AirWave
- Image Management
- Resetting a W-IAP
- W-IAP and Client Monitoring
- Template-based Configuration
- Trending Reports
- Intrusion Detection System
- Wireless Intrusion Detection System (WIDS) Event Reporting to W-AirWave
- RF Visualization Support for Instant
- PSK-based and Certificate-based Authentication
- Configurable Port for W-IAP and W-AirWave Management Server Communication
- Configuring Organization String
- Managing a W-IAP from W-AirWave
- Uplink Configuration
- Intrusion Detection
- Mesh W-IAP Configuration
- Mobility and Client Management
- Spectrum Monitor
- W-IAP Maintenance
- Monitoring Devices and Logs
- Hotspot Profiles
- Understanding Hotspot Profiles
- Configuring Hotspot Profiles
- Creating Advertisement Profiles for Hotspot Configuration
- Configuring an NAI Realm Profile
- Configuring a Venue Name Profile
- Configuring a Network Authentication Profile
- Configuring a Roaming Consortium Profile
- Configuring a 3GPP Profile
- Configuring an IP Address Availability Profile
- Configuring a Domain Profile
- Configuring an Operator-friendly Profile
- Configuring a Connection Capability Profile
- Configuring an Operating Class Profile
- Configuring a WAN Metrics Profile
- Creating a Hotspot Profile
- Associating an Advertisement Profile to a Hotspot Profile
- Creating a WLAN SSID and Associating Hotspot Profile
- Creating Advertisement Profiles for Hotspot Configuration
- Sample Configuration
- ClearPass Guest Setup
- IAP-VPN Deployment Scenarios
- Terminology
216 | DHCP Configuration Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | User Guide
3. Based on type of DHCP scope selected, configure the following parameters:
Name Description
Name Enter a name for the DHCP scope.
Type Select any of the following options:
l Local—On selecting Local, the DHCP server for local branch network is used for
keeping the scope of the subnet local to the W-IAP. In the NAT mode, the traffic
is forwarded through the IPSec tunnel or the uplink.
l Local, L2—On selecting Local, L2, the Virtual Controller acts as a DHCP server
and a default gateway in the local network is used.
l Local, L3—On selecting Local, L3, the Virtual Controller acts as a DHCP server
and gateway. In this mode, the network address for traffic destined to the
corporate network is translated at the source with the inner IP of the IPSec
tunnel and is forwarded through the IPsec tunnel. The traffic destined to the non-
corporate network is routed.
VLAN Specify a VLANID. To use this subnet, ensure that the VLANID specified here is
assigned to an SSID profile. For more information on SSID profile configuration, see
Configuring VLAN Settings for a WLAN SSID Profile on page 102 and Configuring
VLAN for a Wired Profile on page 120.
Network Specify the network to use.
Netmask If Local, Local, L2 or Local, L3 is selected, specify the subnet mask. The subnet
mask and the network determine the size of subnet.
Excluded address Specify a range of IP addresses to exclude. You can add up to two exclusion ranges.
Based on the size of the subnet and the value configured for Excluded address,
the IP addresses either before or after the defined range are excluded.
Default Router If Local, L2 is selected for type of DHCP scope, specify the IP address of the default
router.
DNS Server If required, specify the IP address of a DNS server for the Local, Local, L2 and
Local, L3 scopes.
Domain Name If required, specify the domain name for the Local, Local, L2, and Local, L3 scopes.
Lease Time Specify a lease time for the client in minutes within a range of 2–1440 minutes. The
default value is 720 minutes.
Option Specify the type and a value for the DHCP option. You can configure the
organization-specific DHCP options supported by the DHCP server. For example,
176, 242, and 161. To add multiple DHCP options, click the + icon.
Table 40: Local DHCP Mode Configuration Parameters
4. Click OK.
In the CLI
To configure Local DHCP scope:
(Instant AP)(config)# ip dhcp <profile-name>