Concept Guide

961| show ap arm client-match probe-report Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
22:33:44:55:66:77 50 0 6 9 Wed Apr 10 01:21:29 2013
c8:f7:33:29:82:db 41 0 60 9 Wed Apr 10 01:20:35 2013
ac:81:12:59:5c:12 32 0 50 9 Wed Apr 10 01:20:45 2013
00:24:d7:40:bb:b0 31 0 58 9 Wed Apr 10 01:20:37 2013
00:1a:73:15:8c:5f 32 0 57 9 Wed Apr 10 01:20:38 2013
The output of this command includes the following parameters:
Parameter Description
Client MAC
AP name of the AP from which the client can detect a signal.
Signal
Signal strength, in dBm, of the probe request received from the client.
Assoc
A "Y" in this field indicates that the client is currently associated to that AP radio.
Sec since last heard
Time elapsed since the APradio heard from the client.
Sec since last repor-
ted
Time elapsed since the APradio heard from the client.
Last heard
Date and time at which the AP last heard from the client
Related Commands
Use the following command to enable the client match feature:
l rf arm-profile client-match
The following commands display additional statistics for the client match feature:
l show ap arm client-match neighbors
l show ap arm client-match restriction-table
l show ap arm virtual-beacon-report
l show ap arm client-match unsupported
l show ap arm client-match summary
l show ap arm client-match history
Command History
Introduced in ArubaOS 6.3.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable or Config mode on master
controllers