Concept Guide

727| rf arm-profile Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Parameter Description Range Default
scan-interval
If scanning is enabled, the
scan interval defines how
often the AP will leave its
current channel to scan
other channels in the band.
Off-channel scanning can
impact client performance.
Typically, the shorter the
scan interval, the higher the
impact on performance. If
you are deploying a large
number of new APs on the
network, you may want to
lower the Scan Interval to
help those APs find their
optimal settings more
quickly. Raise the Scan
Interval back to its default
setting after the APs are
functioning as desired.
Recommended Values: 0-
30 seconds
0-2,147,483,
647 seconds
10 seconds
scan-mode
Select the scan mode for the
AP:
l all-reg-domain: The AP
scans channels within all
regulatory domains. This
is the default setting.
l reg-domain:Limit the AP
scans to just the
regulatory domain for
that AP.
— all-reg-domain
scanning
The Scanning checkbox
enables or disables AP
scanning across multiple
channels. Disabling this
option also disables the
following scanning features:
l Multi Band Scan
l Rogue AP Aware
l Voip Aware Scan
l Power Save Scan
Do not disable Scanning
unless you want to disable
ARM and manually configure
AP channel and transmission
power.
— enabled