Concept Guide

721| rf arm-profile Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Parameter Description Range Default
cm-stale-age
<secs>
The controller maintains
client match data for up to
clients showing the detected
SNRvalues for up to 16
candidate APs per client. This
table is periodically updated
as APs send client probe
reports to the controller. This
parameter defines the
amount of time that the
controller should retain client
match data from each client
probe report.
Different controller types
support varying numbers of
clients.
l W-7005: 1024 client
l W-7010: 2048 clients
l W-7030: 4096 clients
l W-7240: 32000 clients
l W-7220: 24000 clients
l W-7210: 16000 clients
0- 65535
seconds
900 secs
cm-steer-backoff
Client Match attempts only
one Apple iOS steer every
backoff interval (in seconds).
— 300 secs
cm-steer-timeout
When a client is steered from
one AP to a more desirable
AP, the steer timeout feature
helps facilitate the move by
defining the amount of time
that any APs to which the
client should NOT associate
will not respond to the AP.
0-255
secs
cm-sticky-check
-interval
<secs>
Frequency at which the AP
checks for client's received
SNR values. If the SNR value
drops below the threshold
defined by the cm-sticky-snr
parameter for three
consecutive check intervals,
that clientmay be moved to
an different AP.
0-255
secs
3 secs