Concept Guide

Command Description
ap wired-port-profile The portfast and portfast-trunk parameters are introduced.
clear The port-security-error gigabitethernet <slot>/<module>/<port>
parameter is introduced. This clears the port-security error from a
gigabit Ethernet IEEE 802.3 interface.
copy The flash: parameter is introduced to copy files from an FTP server.
web-server profile The excludes security headers is introduced to exclude security
headers from HTTP response.
firewall Theip-classification parameter is introduced.
interface fastethernet |
gigabitethernet
The switchport port-security maximum command is modified to
include level and interval sub-parameters. For level, the default
value is logging.
ip access-list ip-geolocation The ip-geolocation parameter is introduced.
ip radius The nas-vlan <nas-vlan> parameter is introduced, which allows you
to configure a RADIUS NAS IP for a branch controller with a VLAN ID.
ip probe default The jitter parameter is introduced.
mgmt-user The console-block parameter is introduced.
mgmt-user The name parameter is introduced.
rf arm-profile The following parameters are introduced.
l 160MHz-support
l interfering-ap-weight
l dynamic-bw
l dynamic-bw-beacon-failed-thresh
l dynamic-bw-cca-ibss-thresh
l dynamic-bw-cca-intf-thresh
l dynamic-bw-clear-time
l dynamic-bw-wait-time
rf dot11a-radio-profile The upper limit for the beacon-period parameter is set to 2000
milliseconds.
rf dot11g-radio-profile The upper limit for the beacon-period parameter is set to 2000
milliseconds.
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide The ArubaOS Command-Line Interface | 6