Concept Guide

2330| wlan ht-ssid-profile Dell Networking W-Series ArubaOS 6.5.x| Reference Guide
Parameter Description Range Default
clone
Name of an existing high-throughput SSID
profile from which parameter values are
copied.
— —
high-throughput-enable
Enable or disable high-throughput SSID to
allow high-throughput (802.11n) stations to
associate.
Enabling high-throughput in an ht-ssid-
profile enables Wi-Fi Multimedia (WMM)
base features for the associated SSID.
— enabled
ldpc
If enabled, the AP will advertise Low-
Density Parity Check (LDPC) support. LDPC
improves data transmission over radio
channels with high levels of background
noise.
— enabled
legacy-stations
Control whether or not legacy (non-HT)
stations are allowed to associate with this
SSID. By default, legacy stations are
allowed to associate.
This setting has no effect on a BSS in which
HT support is not available.
— enabled
max-rx-a-mpdu-
size
Control the maximum size, in bytes, of an
Aggregated-MAC Packet Data Unit (A-
MPDU) that can be received on this high-
throughput SSID.
8191
16383
32767
65535
65535
8191
Maximum size of 8191 bytes. — —
16383
Maximum size of 16383 bytes. — —
32767
Maximum size of 32767 bytes. — —
65535
Maximum size of 65535 bytes. — —
max-tx-a-mpdu-
size
Control the maximum size, in bytes, of an
A-MPDU that can be sent on this high-
throughput SSID.
1576-
65535
65535
max-tx-a-masdu-count-be
Set the maximum number of MSDUs in a
TX A-MSDU on best effort AC.
NOTE: In tunnel and decrypt-tunnel
forwarding mode, TX A-MSDU is disabled if
the value is set to 0. If the value is set to
non-zero, TX A-MSDU is enabled and set to
this value.
0-15 2