Concept Guide

Parameter Description
l 486: Busy Here
l 503: Service Unavailable
l none: Don't send SIP status code
Allow Idle VOIP Client
Displays the status of the allow-idle-
voip-client parameter.
If enabled, the AP allows idle voice clients
to associate even if the AP reaches its
call capacity limit.
If disabled, the AP rejects idle voice
clients to associate if the AP reaches its
call capacity limit. However, the AP
continues to allow active (in-call) and
non-voice clients to associate.
Command History
Version Change
ArubaOS 3.0 Command introduced.
ArubaOS 3.4 The following parameters were deprecated:
l active-load-balancing
l high-threshold-capacity
l noe-call-capacity
l sccp-call-capacity
l svp-call-capacity
l vocera-call-capacity
The following parameters were introduced:
l VoIP Bandwidth based CAC
l VoIP Call Capacity
l VoIP Bandwidth Capacity (kbps)
ArubaOS 3.4.1 License requirements changed in ArubaOS 3.4.1, so the command required
the PEF license instead of the Voice Services Module license required in
earlier versions.
ArubaOS 6.5 The Allow Idle VOIP Client parameter was introduced.
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show wlan voip-cac-profile | 2124