Concept Guide

show references aaa authentication-server
crypto-local
show references aaa authentication-server {ldap <ldap-server-name>}|{radius <radius-server-
name>}|{tacacs <tacacs-server-name>} [page <number>] [start <number>]
Description
Display information about AAA authentication servers.
Syntax
Parameter Description
ldap <ldap-server-name>
Show the number of server groups that include references to the
specified LDAP server.
radius <radius-server-name>
Show the number of server groups that include references to the
specified RADIUS server.
tacacs <radius-server-name>
Show the number of server groups that include references to the
specified TACACS server.
page <number>
Include this parameter to limit output of this command to the
specified number of items.
start <number>
Include this parameter to start displaying the output of this
command at the specified index number.
Example
Issue this command to show the AAA server groups that include references to the specified server. The
example below shows that two server groups, default and rad, each include a single reference to the radius
server rad01.
(host) #show references aaa authentication-server radius rad01
References to RADIUS Server "rad01"
-----------------------------------
Referrer Count
-------- -----
aaa server-group "default" server_group 1
aaa server-group "rad" server_group 1
Total References:2
Command History
This command was introduced in ArubaOS 3.0.
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show references aaa authentication-server | 1811