Concept Guide

show cp-bwcontracts
show cp-bwcontract
Description
Displays a list of Control Processor (CP) bandwidth contracts for whitelist ACLs.
Syntax
No parameters.
Example
The CP bw contracts table lists the contract names, the ID number assigned to each contract, and its defined
traffic rate in packets per second.
(host) #show cp-bwcontracts
CP bw contracts
---------------
Contract Id Rate (packets/second)
-------- -- ---------------------
cpbwc-ipv4 15785 2000
cpbwc-ipv6 15798 2000
cp-rate 15809 20
Related Commands
Command Description
cp-bandwidth-contract
This command configures a bandwidth contract traffic rate which
can then be associated with a whitelist session ACL.
firewall cp
This command creates a new whitelist ACL and can associate a
bandwidth contract with that ACL.
Command History
Version Modification
ArubaOS 3.4 Command introduced.
ArubaOS 6.4.3.0 The CP bw contracts table now lists the traffic rate in packets/second instead
of bits/second.
Command Information
Platforms Licensing Command Mode
All platforms This command requires the
PEFNG license.
Config mode on master
controllers
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show cp-bwcontracts | 1406